At the ASM Heat Treating Society Conference and Exhibition, SECO/WARWICK Group, as the 1st choice solution supplier for green heat treatment and metallurgy, will present top technologies.
The focus will be on vacuum and atmospheric heat treatment technologies, including the following products:
- Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.
- CaseMaster Evolution T – a triple-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
- Pit-LPC – an alternative to atmosphere carburizing, which achieves maximum carburizing efficiency using vacuum technology. Pit-LPC = cost reduction, taking care of the environment, production increases – all this is possible due to the process being carried out in vacuum at higher temperatures.
- Super IQ – a new-generation Integral Quench (IQ) furnace designed for low-pressure carburizing applications. This solution is designed so that it can be added to existing atmosphere carburizing furnace process lines without any need to significantly modify the existing infrastructure.
- ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, enabling the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.
- Rotary Retort Furnaces – rotary retort furnaces are specifically designed for continuous production and uniform heat treating of small parts, such as coins, small hardware, nails, bearings, chain components, and fasteners, such as nuts, bolts, and screws.
- Roller Hearth Furnaces – roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. Efficient, continuous annealing of steel castings and forgings.
If you want to learn more about vacuum heat treatment technology, you must see this lectures!
|
/ Date: October 17th, 01:40 pm
|
/ Date: October 18th, 04:00 pm
|
We are looking forward to seeing you at booth #2101 SECO/VACUUM and #1918 SECO/WARWICK.
SECO/VACUUM will also be hosting a Wellness Lounge near the ASM membership lounge on the expo floor, with 3 FREE massage therapists, infused water, fresh fruit and healthy local snacks throughout each day of the exhibit.
Schedule an appointment:
events@secowarwick.com
Let's/Meet
Zawistowski Piotr
GESCHÄFTSFÜHRER, SECO/VACUUM, USA
LORD MARCUS
PRESIDENT AND MANAGING DIRECTOR, SECO/WARWICK USA
Korecki Maciej
VIZEPRÄSIDENT GESCHÄFTSBEREICH VAKUUMÖFEN
Marteeny Don
Hart Tom
Product Manager, SECO/VACUUM
Walczak Rafał
Sybo Ryan
Project Manager
17-19 Okt, 2023
Address:
Michigan, USA
Detroit
Our booth:
#2131 #1918
Website:
https://www.asminternational.org/web/heat-treat
